趋势行情来了？就看这一指标

admin

一.指标示图

二.指标说明

趋势共振启动主图与副图在趋势起点处形成共振信号，精准识别趋势行情的启动时机，辅助判断波段操作的最佳介入点

主图指标加载至K线主图，副图指标加载至下方副图区域，选G公式用于盘后一键筛选符合共振条件的标的。日常看盘时，重点观察主图与副图是否在同一位置或相邻位置出现趋势起点标识。当两者形成共振，且时间间隔在5个交易日之内，即为重点关注对象。建议结合成交量放大、板块热度及大盘环境综合研判，避免单一信号盲目操作。

三.指标主图源码

DRAWTEXT_FIX(1,0.005,0,0,'所属风格:'),COLORYELLOW;
DRAWTEXT_FIX(1,0.06,0,0,FGBLOCK),COLORYELLOW;
DRAWTEXT_FIX(1,0.005,0.05,0,'所属概念:'),COLORMAGENTA;
DRAWTEXT_FIX(1,0.06,0.05,0,GNBLOCK),COLORYELLOW;
DRAWTEXT_FIX(C>O,0.01,0.9,0,'V信公Z号：量化研究'),COLOR0000FF;
稳健趋势:=(C+0.618*REF(C,1)+0.382*REF(C,2)+0.236*REF(C,3)+0.146*REF(C,4))/2.382;
主力趋势:EMA(((SLOPE(C,22)*20)+C),55),COLORYELLOW,LINETHICK2;
上升趋势:IF(稳健趋势>=主力趋势,主力趋势,DRAWNULL),COLORRED,LINETHICK2;
下降趋势:IF(稳健趋势<主力趋势,主力趋势,DRAWNULL),COLORBLUE,LINETHICK2;
ZF0:=MAX(HIGH,REF(HIGH,1))-MIN(LOW,REF(LOW,1));
ZF:=MA(ZF0,3)*0.8;
QSK:=ABS(CLOSE-REF(OPEN,1))/ZF0>0.50;
SZ1:=HIGH>REF(HIGH,2) AND CLOSE>REF(OPEN,1) AND QSK;
XD1:=LOW<REF(LOW,2) AND CLOSE<REF(OPEN,1) AND QSK;
SZT:=BARSLAST(SZ1);
XDT:=BARSLAST(XD1);
DT:=SZT<XDT;
KT:=XDT<SZT;
STICKLINE(DT,OPEN,CLOSE,3,0),COLORRED;
STICKLINE(KT,OPEN,CLOSE,3,0),COLORGREEN;
主力买买:=EMA(((100 * (CLOSE - LLV(LOW,34))) / (HHV(HIGH,34) - LLV(LOW,34))),3);
主力卖卖:=SMA((((HHV(HIGH,34) - CLOSE) / (HHV(HIGH,34) - LLV(LOW,34))) * 100),2,1);
大盘:=EMA(((100 * (INDEXC - LLV(INDEXL,34))) / (HHV(INDEXH,34) - LLV(INDEXL,34))),3);
主力换手:=(((VOL/MA(V,5))) >= 2);
趋势起点:=(((CLOSE / REF(CLOSE,1)) - 1) * 100);
A:=(CROSS(主力买买,主力卖卖) AND (主力买买 >= 45));
B:=(CROSS(主力买买,大盘) AND (主力买买 >= 45));
D:=(CROSS(主力买买,75) AND (趋势起点>= 2));
DD:=(CROSS(主力买买,20) AND (趋势起点>= 2));
DRAWTEXT((A > 0),(LOW * 0.99),'←买'),LINETHICK0,COLORFFFF00;
DRAWTEXT((B > 0),(LOW * 1.02),'←大盘共振'),LINETHICK0,COLOR0055FF;
DRAWTEXT((D > 0),(LOW * 1.0),'←趋势起点'),LINETHICK0,COLORRED;
DRAWTEXT((DD > 0),(LOW * 0.98),'←低点启动'),LINETHICK0,COLORRED;
TJ:=((CLOSE > OPEN) OR ((CLOSE = OPEN) AND (CLOSE > REF(CLOSE,1))));

四.指标副图源码

ABC1:=EMA((CLOSE+HIGH+OPEN)/3,4);
ABC2:=CLOSE>ABC1;
ABC3:=OPEN>REF(CLOSE,1) AND ABC2;
ABC4:=CLOSE>REF(CLOSE,1);
ABC5:=BARSCOUNT(CLOSE)>=60;
ABC6:=CLOSE<OPEN;
ABC7:=ABC3 AND ABC4 AND ABC6;
ABC8:=NOT(NAMELIKE('ST') OR NAMELIKE('*ST'));
ABC9:=IF(CODELIKE('688'),0,1);
ABC10:=EMA(CLOSE*70,3);
ABC11:=EMA((CLOSE*1.1-CLOSE*0.9)*80,3);
ABC12:=ABC10/(ABC10+ABC11)*100;
ABC13:=HHV(HIGH,9)-LLV(LOW,9);
ABC14:=HHV(HIGH,9)-CLOSE;
ABC15:=CLOSE-LLV(LOW,9);
ABC16:=ABC14/ABC13*100-70;
趋势起点:FILTER(ABC7,10) AND ABC5 AND ABC8 AND ABC9 AND ABC16 COLORRED DOTLINE;
DRAWICON(趋势起点,1,9);
DRAWTEXT(趋势起点,0.6,'★趋势起点'),COLORYELLOW;

五.指标选G源码

ABC1:=EMA((CLOSE+HIGH+OPEN)/3,4);
ABC2:=CLOSE>ABC1;
ABC3:=OPEN>REF(CLOSE,1) AND ABC2;
ABC4:=CLOSE>REF(CLOSE,1);
ABC5:=BARSCOUNT(CLOSE)>=60;
ABC6:=CLOSE<OPEN;
ABC7:=ABC3 AND ABC4 AND ABC6;
ABC8:=NOT(NAMELIKE('ST') OR NAMELIKE('*ST'));
ABC9:=IF(CODELIKE('688'),0,1);
ABC13:=HHV(HIGH,9)-LLV(LOW,9);
ABC14:=HHV(HIGH,9)-CLOSE;
ABC16:=ABC14/ABC13*100-70;
趋势起点:FILTER(ABC7,10) AND ABC5 AND ABC8 AND ABC9 AND ABC16;
六.注意事项：分开安装：复制安装时，请将主图指标、副图指标和选gu公式分开进行操作，不要混在一起复制安装。出现错误提示——先删“问号”：如果安装时报错，先找到报错提示对应的代码行，检查里面是否有“？”符号，如果有，将其删除。出现错误提示——检查空格：如果仍然报错，重点检查代码中的 “AND”和 “OR” 这两个词前后是否缺少空格。补上空格即可。核心原则：修改时不要改变原公式的计算逻辑，只在报错的地方做最小幅度的调整，确保意思不变。